Trixology

WeatherCat => WeatherCat Feature Requests => Topic started by: berniemacmac on February 26, 2012, 09:19:42 AM

Title: sensor corrections
Post by: berniemacmac on February 26, 2012, 09:19:42 AM

Hello

DC ahead my English is not good.

Did the WeatherCat V0, 92 build 35 installed and it runs very stable so far.

But a question
Is it possible for the various sensors to enter corrections.
for example:
My anemometer is mounted at a height of 4 meters, but in order to determine the actual wind speed, the anemometer will be mounted at a height of 10 meters. So I have the wind speed by a factor of 1.257 times the actual wind speed to be determined.

I've run the program "PC weather station" by Werner Krenn and one can calculate the corrections with a weather machine.

I hope I have my question to some extent understandable five formulated correctly.

Thank berniemacmac

Title: Re: sensor corrections
Post by: WCDev on February 26, 2012, 10:33:39 AM

Hi berniemacmac,

Thanks for the feedback, good to know it's running OK for you.

It isn't possible at the moment, but it is on the to-do list as you're the second person to request this - see http://athena.trixology.com/index.php?topic=62.0 (http://athena.trixology.com/index.php?topic=62.0)


Cheers,
Stu.