Trixology
WeatherCat => WeatherCat General Discussion => Topic started by: cmgc on October 08, 2022, 09:15:20 PM
-
I am having problems integrating a Davis Vantage console with a Belfryboy logger using weathercat. Using an emulator I have loaded in
Baudrate – 19200
Data bits – 8
Parity – None
Stop bits – 1
I have restarted the mac and had to have a few goes getting weather cat to fire up properly. It is now up and firing and it made a much bigger effort at saying it was downloading historic data for the last 40 mins. It took 2 - 3 mins doing it shows a straight line graph where the data has been stored in the logger and not read into weathercat when it was live running. !!!!
The datalog over this period seems to show actual values for the switch off period but they merely provide a straight line between two real live data points.
Can anyone help!!!
-
Dear cmgc and WeatherCat troubleshooters,
Sorry about the circumstances of your post. However, since this is your first posting on the WeatherCat forum, let me welcome you to the forum.
I am having problems integrating a Davis Vantage console with a Belfryboy logger using weathercat. Using an emulator I have loaded in
Baudrate – 19200
Data bits – 8
Parity – None
Stop bits – 1
I have restarted the mac and had to have a few goes getting weather cat to fire up properly. It is now up and firing and it made a much bigger effort at saying it was downloading historic data for the last 40 mins. It took 2 - 3 mins doing it shows a straight line graph where the data has been stored in the logger and not read into weathercat when it was live running. !!!!
The datalog over this period seems to show actual values for the switch off period but they merely provide a straight line between two real live data points.
Can anyone help!!!
It has been so long since I have looked for these data loggers that I needed to update my bookmarks. It appears to me that this is the current link for these loggers:
https://belfryboyweatherbits.blogspot.com/ (https://belfryboyweatherbits.blogspot.com/)
Normally these loggers are plug-n-play. If you cannot seem to get the data from your console, and these loggers are hand-made, my first suggestion would be to get in touch with fellow making them. That would seem to be the most likely culprit.
Sorry, I cannot be of much more help.
Edouard