Author Topic: Unwanted rain reading on graph's  (Read 1085 times)

Jace

  • Storm
  • *****
  • Posts: 811
    • DW9675
    • ISuffolk62
    • Yoxford weather site.
  • Station Details: Davis Vantage Pro2, with Mac USB Data Logger. 2.4 GHz Intel Core 2 Duo MacBook, with 8 GB 1033 MHz DDR3 Memory, running Mac OSX Version 10.10.1 (Yosimite).
Unwanted rain reading on graph's
« on: May 28, 2012, 06:09:26 PM »
Hi all

I was taking advantage of the dry weather to check the calibration of the rain gauge today. had the console in 'standby' mode, and weather cat disconnected from the console. Cal check was ok, reset the console daily rain readings etc, reconnected Wcat, and lo ! lots of rain data, listed on  [cat]

I've cleared the rain/hr and daily rain using the data editor, but I have massive spikes on my rainfall mm/hr charts, is there any way to correct this ?

Cheers

JC

WCDev

  • WeatherCat Developer
  • Administrator
  • Storm
  • *****
  • Posts: 2809
    • CW9739
    • ISCOTLAN25
    • Trixology
  • Station Details: Main Station: Vantage Pro-2, 24hr fars, solar, soil/leaf station, extra temp stations, no U.V. WeatherLink IP.
Re: Unwanted rain reading on graph's
« Reply #1 on: May 28, 2012, 08:10:50 PM »
Hi JC,
Try giving WeatherCat a restart - it might be a cache hanging on to the data.

Cheers,
Stu.