I'd make one small change. WeatherCat uses a slightly different tag for statistics the LWC did. You used to only need ST1$ for the full set of statistics. Now you need:
STRECORDS$
STRECENT$
ST1$
What do folks prefer - is more statistics always better?
The local weather information on this web page is generated by Trixology WeatherCat [link] software.
It appears you should either provide the link to WeatherCat or delete the word "[link]".
May I ask if you are using a template for your site or did you code it from scratch?
The old ST1$ on LWC had records, recent, and annual, so there was no option.
I guess each person may want something a little different. On mine (linked HERE (http://www.avon-weather.com/statistics.html)) I look at records and recent, and rarely refer to annual unless we've had a particularly high/low hot/cold record and I want to compare it to previous years.
We'll probably have as many opinions as replies, so anything will be a compromise. It is your template, so whichever you think is best is probably what you should post.
As for my opinion, I consider a record to be a statistic. I don't think anyone would think to go to my "About" page (the equivalent of your "Station" page) to see what the hottest day was. Apparently Stu considered records to be statistics, as he had them as part of LWC's ST1$ statistics tag, and now has them as STrecords$
WeatherCat offers finer control over the output - the old tags are present for compatibility with older pages, but shouldn't be used any more. A complete list of the current ones can be found at: http://live.trixology.com/custom/
Unfortunately, the nightmare disguised as a hobby is beckoning . . . . . . . .
QuoteUnfortunately, the nightmare disguised as a hobby is beckoning . . . . . . . .
Did you get confirmation that the breather is causing the leaks?
Hi Edouard
Sorry to hear about all the leaks and the only one the might stop leaking is the rear motor seal after driving for a while after it gets seated but the rest sounds like gasket problems to me good luck
cheers
[cheers1]
Thanks for the work on this template Edouard!
Thanks for the template, really enjoyed the challenge of html!. I have got it up and running and you can see it at weather.brandonsuffolk.com . Whilst it's cold and miserable during the winter I'm going to experiment and explore what I can do to personalise the site. Would recommend any newbies to give it a try
I have got it up and running and you can see it at weather.brandonsuffolk.com .
I like the clean, simple look of Edouard's SeaMonkey template. I'm waiting for him to build a tab that supports SteelSeries Gauges and another that includes the digital image of the Davis console.
Then I'm going to use it myself. Now that his Buick is running, he can spend the winter doing stuff for the rest of us. :)
Thanks for the template - I played with it a bit in Dreamweaver and made it work well for my station. I like the simplicity of the pages and the ease of customization once I figured out what WC was doing (although I'm still not quite sure HOW it's doing it...LOL)
My website with this template is on:
http://www.billcurry.ca/weather/ (http://www.billcurry.ca/weather/)
Great program and fun to play with the html and scripts.
I do note that some other templates have a moon phase and rise/set dataset.
Is there any way to put this in text form into this template?
Sunrise today: SUNRISELOCAL$
Date Time Phase % Rise Set 1 2015/12/25 05:11 Full Moon 0.99 18:18 07:12 2 2015/12/26 Waning Gibbous 0.99 19:15 08:06 3 2015/12/27 Waning Gibbous 0.96 20:12 08:54 4 2015/12/28 Waning Gibbous 0.91 21:08 09:38 5 2015/12/29 Waning Gibbous 0.85 22:02 10:18 6 2015/12/30 Waning Gibbous 0.77 22:54 10:55 7 2015/12/31 Waning Gibbous 0.68 23:46 11:30 |
I am quite happy with what I've got going using this template, but I do like the look of the other gauges I see on some folks websites.
How does one do like this:
http://www.overlookweather.com/WeatherCat/index.html
Those gauges on overlookweather are WeatherCats Custon Gauges not the Steel Guages.
I ran across your templates as I was trying to find out how to do a Custom Webpage. You have done a lot of work setting up this teaching material. One question: Will I be able to pass the webcam in a Custom Webpage on to WU and others? Will it have a URL? I am not happy with the webcam compression results of WC.
Just thought I'd give another shout out to the wonderful folks involved in making the Sea Monkey Template.
I have been playing a bit and will continue to tweak it, but I am quite pleased with my site and the way it show information.
I got the Steel Gauges to play within the template, which I think adds a lot to the look, and it certainly adds a lot of interesting detail.
Hi all,In most cases it is solved by changing the links used on that page.
Had a bit of an interesting challenge.
My sea monkey based website was up and I had gauges on the index page.
I put my whole website (photography business, and the weather site is a sub under this) into a secured site status (got an SSL certificate). The instant I did this, I lost all the gauges on the index, I'm assuming due to the javascript?
I have for now just thrown on my direct reporting Davis to the index page and left the other 3 pages alone - but wondering if anyone else has had an issue with Javasciript inside a secured website?
If there's an easy fix, I'd love to put my gauges back!
Bill
My website is at:www.billcurry.ca/weather
Thanks all -This is nearly at the bottom of the page:
I do need the secured site status on my photography page as that is something some folks depend on.
I knew that the java script was probably the issue, and I think that wvdkuil has the answer, if I can figure out where the pages are that it's asking for. I lost the gauges, but I also lost a tide reference page and a moon state page (graphs I re-posted to my page with permission) - and both those are http not https.
wvdkuil -
That does make sense.
So what I'm seeing is that if it doesn't have an https the page won't load it - correct?
I'll hunt through this and see if I can fix it.
Bill
<!-- CDN hosted JQuery library -->
<script src="http://code.jquery.com/jquery-1.11.1.min.js"></script>
<!-- or... -->
<!-- Local JQuery library, do not use if your containing page already pulls in a copy of JQuery -->
<!-- <script src="scripts/jquery-1.11.1.min.js"></script> -->
That one line with the http link should bew changed to https <!-- CDN hosted JQuery library -->
<script src="https://code.jquery.com/jquery-1.11.1.min.js"></script>