Author Topic: Weathercat finding two 'cu.SLAB_USBtoUART' after Mavericks fresh install.  (Read 8426 times)

Randall75

  • Storm
  • *****
  • Posts: 1332
  • CWOP-CW6734 WeatherUnderground-KOHNEWAR6
    • CW6734
    • KOHNEWAR6
    • Randy's Weather On The Hill
  • Station Details: Davis Vantage Pro 2 Plus.iMac i5 OS High Sierra 10.13.6 8GB Ram, WeatherCat 3,Logitech 9000 Pro Web Cam
Hi Val
 Send Stu a personal message and see why he has to say about it


Also if you haven't upgraded to 10.9.2 please do it has a lot of fixes in it that makes WC run even smoother


cheers


 [cheers1]

WCDev

  • WeatherCat Developer
  • Administrator
  • Storm
  • *****
  • Posts: 2911
    • CW9739
    • ISCOTLAN25
    • Trixology
  • Station Details: Main Station: Vantage Pro-2, 24hr fars, solar, soil/leaf station, extra temp stations, no U.V. WeatherLink IP.
Hi Val,
I'd suggest removing the Silicon Labs driver from your computer, then rebooting. Now launch WeatherCat - if it's still showing /dev/cu.SLAB_USBtoUART then there's still a copy somewhere - it might be in a cache, so try one of the many third party cache cleaners. Once you have no /dev/cu.SLAB_USBtoUART showing in WeatherCat, then install the latest one and try again.

If it's still showing two comms ports, it might be worth a mail to SiliconLabs - they may have seen the issue before.