Hi All,
I'm wanting to fire Weathercat back up, and feed it from my Meteobridge, which already is feeding loop data elsewhere... so was hoping to try to use the XML driver, but there's not much for documentation that I can see (all I see is the stuff on page 241 of the manual). Meteobridge's native XML is not formatted properly
<logger>
<TH date="20240113211655" id="th0" temp="-3.3" hum="96" dew="-3.8" lowbat="0"/>
<WIND date="20240113211721" id="wind0" dir="292" gust="0.0" wind="0.4" chill="-3.3" lowbat="0"/>
<RAIN date="20240113211715" id="rain0" rate="0.0" total="455.2" delta="0.0" lowbat="0"/>
<THB date="20240113211629" id="thb0" temp="22.7" hum="30" dew="4.2" press="984.7" seapress="1002.0" fc="2" lowbat="0"/>
<DATA date="20240113211700" id="data10" val="11.00" lowbat="0"/>
<DATA date="20240113211700" id="data11" val="569.79" lowbat="0"/>
<DATA date="20240113211700" id="data12" val="7.00" lowbat="0"/>
<DATA date="20240113211700" id="data13" val="48.00" lowbat="0"/>
<DATA date="20240113211700" id="data15" val="61.00" lowbat="0"/>
<DATA date="20240113211700" id="data16" val="1.00" lowbat="0"/>
</logger>
So was going to try to figure out a template, but was hoping someone had some actual examples rather than just blindly trying to figure it out.
Thanks!