Trixology

WeatherCat => WeatherCat Releases => Topic started by: Administrator on July 15, 2012, 05:59:31 PM

Title: WeatherCat V1.0.2 Released
Post by: Administrator on July 15, 2012, 05:59:31 PM
We are pleased to announce the release and immediate availability of WeatherCat version 1.0.2.

Changes since version 1.0.1 include:

Download
Two builds are available, one for Mac OS X 10.6 and later and one for 10.5.
If you are running Mac OS X 10.6 or later, download this build (http://trixology.com/downloads/WeatherCat.zip) (V1.02, 16.2 MByte)
If you are running Mac OS X 10.5, download this build (http://trixology.com/downloads/WeatherCatV102_105.zip) (V1.02, 16.2 MByte)
Title: Re: WeatherCat V1.0.2 Released
Post by: Randall75 on July 15, 2012, 06:55:49 PM
Hi Stu
 Installed with no problems will report back after running a while
Thanks
 [cheers1]

Title: Re: WeatherCat V1.0.2 Released
Post by: jace on July 15, 2012, 07:16:11 PM
Hi Stu

Version 1.02 Build 3 (1.0.2) installed no problems.

John
Title: Re: WeatherCat V1.0.2 Released
Post by: HairyMcLeary on July 15, 2012, 11:42:50 PM
Up and running without any issues... as usual  [tup]

Tony
Title: Re: WeatherCat V1.0.2 Released
Post by: WCDev on July 16, 2012, 04:36:00 PM
Thanks folks - good to know  [tup]
Title: Does it need lots of testing? (Re: WeatherCat V1.0.2)
Post by: elagache on July 16, 2012, 10:17:51 PM
Howdy Stu and WeatherCat fans,

Sorry, things a little crazy around here so didn't get back to this until now.

Stu, where should we be putting our testing effort?  Just looking at the Change-log, 1.0.2 looks like a relatively minor update.  Would you prefer that we all still put it through the ringer, or are you happy with the results so far and would prefer that some of us keep "taunting" 1.1 Beta?

Cheers, Edouard [cheers1]
Title: Re: WeatherCat V1.0.2 Released
Post by: WCDev on July 16, 2012, 10:59:15 PM
1.1 if you can. 1.0.2 primarily adds code signing to the client - it wasn't signed previously and would refuse to open on 10.8 as the default for 10.8 is 'Apple and recognised third party developers'. So 1.0.2 was mainly just a maintenance release to get the certificate on the client - it also included the heat index change which had previously been tested.

Hope this helps,
Stu.
Title: Re: WeatherCat V1.0.2 Released
Post by: meteoperugia on July 17, 2012, 08:21:19 AM
Installed and running well!  [bounce]
Title: Re: WeatherCat V1.0.2 Released
Post by: jace on July 17, 2012, 10:46:22 AM
Quote from: WCDev on July 16, 2012, 10:59:15 PM
1.1 if you can. Stu.

OK Stu, have gone back to 1.1, will see if I get any more crash reports for your return from your holidays ! :)

John
Title: Re: WeatherCat V1.0.2 Released
Post by: WCDev on July 17, 2012, 06:24:52 PM
Thanks chaps.

New banner Fedrico? I like the colour scheme  [tup]
Title: Re: WeatherCat V1.0.2 Released
Post by: embayweather on July 20, 2012, 03:54:35 PM
Sorry for the delay,silly season at the mo. Installed easily here and working well. No hitches at all.

Best wishes

Mike
Title: Re: WeatherCat V1.0.2 Released
Post by: WCDev on July 20, 2012, 05:41:03 PM
Thanks for the update Mike  [tup]

 
Title: Re: WeatherCat V1.0.2 Released
Post by: Eric on July 20, 2012, 06:21:15 PM
Hi, installed without any issues, great as usual. Thks.
Rgds
Eric
Title: Re: WeatherCat V1.0.2 Released
Post by: Doc on July 21, 2012, 07:47:35 AM
It's in, and it's running.  It even survived the quarter day power outage and multiple short power losses we've had for the last couple of days.

Doc
Title: Re: WeatherCat V1.0.2 Released
Post by: embayweather on July 22, 2012, 12:25:28 AM
Coming up to 100,000 data points now with no problems. I have had 120 sensor error, so I must look in to that, but no Comms error. Well done really happy with this version.

Best wishes

Mike