To help diagnose the wind speed discrepancies I think we will need a screen shot of the gauge, and a copy of your realtimegaugesWC.txt file taken at the same time. Then we can see what data is being sent, and what is being done with it.
Thanks Mark
Hi Mark here is my reatimegaugesWC.txt and the gauges taken at the same time. weatherCat was reading a wind run of 1.85 miles at the time. The realtimegauageWC.txt file shows the same, but displayed 1.2 miles on the wind rose dial.
"EDIT" - I've just noticed that if km/h or m/s are selected, after a wee while the selected units defaults to mph, only happens for wind speed. Temp, pressure, rainfall stay on the selected units.
{"date":"19/02/13",
"timeUTC":"2013,2,19,10,32,18",
"SensorContactLost":"0",
"forecast":"Current forecast is -- Increasing clouds with little temperature change. Precipitation possible within 24 to 48 hours. --", "tempunit":"°C",
"windunit":"MPH", "pressunit":"mb", "rainunit":"mm",
"temp":"1.8",
"tempTL":"-3.8", "TtempTL":"03:00", "tempTH":"1.8", "TtempTH":"10:27", "temptrend":"0.6", "intemp":"18.4",
"dew":"1.1", "dewpointTL":"-4.4", "dewpointTH":"1.2", "TdewpointTL":"03:00", "TdewpointTH":"10:21", "apptemp":"-0.3", "apptempTL":"-6.4", "apptempTH":"0.0", "TapptempTL":"03:00", "TapptempTH":"10:00", "wchill":"1.8", "wchillTL":"-3.8", "TwchillTL":"03:00", "heatindex":"1.8", "heatindexTH":"1.8", "TheatindexTH":"10:27", "humidex":"-0",
"wlatest":"2",
"wspeed":"0.0", "windTM":"4.00",
"wgust":"3",
"wgustTM":"4", "bearingTM":"261", "TwgustTM":"09:17", "bearing":"265", "avgbearing":"266", "BearingRangeFrom10":"260", "BearingRangeTo10":"260", "Tbeaufort":"0", "press":"1020.4", "pressTL":"1020.3", "TpressTL":"09:40", "pressTH":"1022.2", "TpressTH":"00:01", "pressL":"967.9", "pressH":"1038.5", "presstrendval":"0.0", "LastRainTipISO":"2013-02-14", "hourlyrainTH":"0.0", "ThourlyrainTH":"10:00", "rfall":"0.2",
"rrate":"0.0",
"rrateTM":"0.0",
"TrrateTM":"10:00",
"hum":"95",
"humTL":"95",
"ThumTL":"10:26",
"humTH":"98",
"ThumTH":"09:00",
"inhum":"35",
"UV":"0.0",
"SolarRad":"0",
"CurrentSolarMax":"0",
"domwinddir":"W",
"WindRoseData": [0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.1,0.6,1.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0], "windrun":"1.85",
"version":"V1.14, Build 230", "build":"0",
"ver":"9"}
Cheers John